In this instruction,i will show you guide on how to use NCS Expert to perform EWS & CAS coding for BMW E39.And for more NCS Expert cases,please check here:NCS Expert projects

BMW NCS EXPERT CODING - This is a tutorial on basic module (ecu) coding, with NCS Expert tool. The information contained on this video are for educational an. Below is our SP-Daten update matrix, this outlines the latest versions of the SP-Daten for the different models. We also stock the base / original SP-Daten files as well. Model Latest Base / Original R56 V67 – Product V32 –. Read moreSP-Daten Update Matrix.

Preparations:

Procedures:

1.When you run NCS Expert you will see the next screen. Select “file – load profile”

2.In next screen you must select “code control unit. allow ZCS reading” : (it means that you will able to read coding from any ECU for selected chassis and than write this readed coding to all other

ECU for selected chassis)

Ncs Expert Bmw Download

3.In the next screen you will see: (the CHASSIS FG FA (it the coding data) now is empty) And now we need to enter this data. In this screen please select (F1) VIN/ZCS/FA

4.In the next screen you will see the same picture: (the CHASSIS FG FA (it the coding data) now is empty). And now we need to enter this data. In this screen please select (F1) ZCS/FA f. ECU. It

means that we will read ZCS/FA data from (f.) ECU

5.In the next screen you will see the chassis choice because depend on chassis the different list of ECU from wich we able to read coding. (we select E39)

6.In the next screen NCS Expert propose us to select from wich ECU we want to read “Correct” coding data. In most cases such coding stored in EWS or IKE. But in you car is better to read it

from EWS if this ECU originally for your car. In any case we can read the data from proposed ECU in selected chassis. (You can try read from different ECU for comparison). In this screen we

select EWS

7.After ECU choosing and pressing OK the NCS Expert will read coding data from specified ECU and write it in the upper part of NCS Ecspert window. (in was blank before on step 4).

Now NCS Expert ready to write this coding data to all ECU available in chassis.

In the end of this step we press F6 “Back”

8.We will see the screen with readed coding in upper part.

In the middle part of window will be write “Ready to coded: “ABS,EWS,IKE,DSC, LSC etc ECU” (list ECU depend from chassis)

In the bottom part of window (button part) will be active buttons: F1, Program Car, ECU etc.

If we select “Program Car” the NCS will program all ECU available in this chassis and listed in middle part of screen with data readed before and writed in upper part of screen.

If we select “Program ECU” the NCS will propose us to select special ECU which we want to code.

After selection we must press “execute job” or “process car”

And coding will start.

Introduction: BMW INPA E60 Coding/Diagnose Guide

In this article,I will collect some cases about BMW INPA working case on BMW E60,and if you have other BMW INPA E60 case want to share with peoples,please sent to my e-mail.I will put it here to share it.

Step 1: Preparation

BMW INPA 6.4.3 software, free download

BMW INPA E60:
BMW INPA Reset BMW E60 Airbag Waring Light

How to Reset & Relearn E60 BMW Automatic Transmission with INPA

BMW E60 Coding by INPA and NCS Expert Cable

BMW INPA Reset BMW E60 Airbag Waring Light:
For BMW E60 owner,the airbag warning light will light on after the valve has been replaced with the HID bobbles.So you need to reset the airbag warning light. This time, I reset the airbag warning with INPA software A simple method is described. E60, but I think it can be applied to various kinds of vehicles such as BMW E90, E65, E70, R56.

Step 2: Read and Clear Error Massage

Start up INPA and click on Functional jobs

Select vehicle F1 (E60)

Press F4 Error

Press F1 Read EM (call up the error memory)If you press F2 Clear EM (clear the error message)

A warning can be reset.
* You can reset all other modules, not just the A / B module. If you have other errors at the time of call, it is better to check it

Step 3: How to Reset & Relearn E60 BMW Automatic Transmission With INPA

BWM E60 automatic transmission reset and relearn by using BMW INPA K+DCAN cable.

It is a reset method of learning function. Especially when there is something wrong with a large displacement car There seems to be improvement in some cases. (Physical breakdown is excluded)

Launch INPA and select GS 19

Select F6

Reset complete with F3

Step 4: BMW E60 Coding by INPA and NCS Expert Cable:

This part talk on how to use BMW INPA NCS Expert cable to coding for BMW E60

Use the BMW INPA K+DCAN Cable to connect car with laptop via the BMW E60 OBD2 port. Open BMW NCS Expert Coding software. Click “File” then choose “Load File”.

Select “Default Profile” and click “OK”.

Press the F1 button “VIN/ZCS/FA”

Then press the F3 button “ZCS/FA f.ECU” and select BMW chassis “E60”.

Choose ECU: CAS ECU or LMA ECU.

It will show BMW E60 car VIN number, check it then press F6 button to back.

Ncs Expert Bmw F30

Check if it show “get coded” then press F3 button “Process car” and F4 button “Process ECU”.

Now just select the ECU control unit you want to do coding.
For example, BMW E60 6BMOT, click “OK” to continue.

It will show the selected ECU information, click “OK”.
Check if it show the selected ECU +”get coded” then press the F3 button “Execute job”.

And wait it complete, it will show “Coding ended”.
BMW Coding by NCS Expert and $13.99 INPA K+DCAN USB Interface done!

From http://www.car-auto-repair.com, post BMW INPA E60 Coding/Diagnose Guide

Be the First to Share

Recommendations

Ncs Expert Free Download

Ncs Expert Bmw Coding

• Battery Powered Contest

• Plywood Challenge

• Plastic Contest